Tag Archives: ascii

Tie Fighter in ASCII

I saw this CNC halftones article quite some time ago and setup the the CAM drawing quite some time ago. I never really got around to routing it, as I wanted to test it in two-color plastic instead of the painted plywood the original authors used. As luck would have it, BF plastics had some white/black material on clearance last week so I picked up half a sheet. The material is only 0.1″ thick, so I used 3m spray adhesive to mount it to 1/2″ plywood. About 30 minutes or so with a 60 degree v-carve bit and it was done! I need to pick up a 45 degree bit i think, as this one did go a little deep in places, you can actually see some wood on some of the wider letters. Still looks sharp!

The .dxf and gcode can be found here.

tie-fighter-crop

On the machine:

tie-fighter-in-flight